en Vogue UV Sealer 15ml 50401
Our original, crystal-clear UV Sealer is a thin-viscosity top coat that finishes your service with a high-gloss shine.
Features & Benefits:
- Acrylic-like strength with greater flexibility
- Allows for growth and flexing of natural nails underneath
- Reduces lifting caused by non-flexible products
- It can be applied to all five nails at once without worrying about the product running into cuticles or side walls
How To Use:
The sealer is a UV-only gel top coat. Apply a thin layer all over your finished nail and cure for 120 seconds in a UV or UV/LED lamp. Cleanse with Prep & Clean and finish with Renew & Repair Cuticle Oil.
FAQS:
My lamp is UV/LED - will that work? Yes, as long as the lamp has UV capability, it will cure the sealer, which is no problem.
How is Sealer different from your other hard gel top coats? Sealer is our only gel top coat in a pot, giving some nail techs more product control. While it is a traditional, tacky top coat like Super Shine, it is a thinner formula. It is also our most durable top coat. Can I use Sealer on top of lac it!? We recommend sticking with I'm A No-Wipe, Shine, or Super Shine for non-porous options. Why is sealer curing patchy? This is likely because oil was left on the surface before application, or Prep & Clean was not fully dry.
General Resin System Use:
- Begin with a properly prepped and cleansed nail. [If using tips or forms, apply them now.]
- [Optional Step] For extra adhesion, apply a thin layer of Super Bond to the nail and let air dry for 30 seconds.
- Apply a thin Connector or CBS Connect layer and cure for 60 seconds LED/2 minutes UV.
- With your favourite gel brush, place a bead of Premium Modeling Resin or Extender Resin in the centre of the nail and gently guide it into the desired length and shape. Remember, use the product to move the product. With Premium Modeling Resin, you can repeat the process across all five fingers before curing. Cure for 60 seconds LED/2 minutes UV. Apply a second layer as needed.
- Wipe the dispersion layer with Prep & Clean and a No-Lint Wipe, then file/buff it into shape as needed.
- Apply two coats of your favourite colour, or for a natural finish, go ahead and apply your favourite top coat. Cure fully.
- Cleanse with Prep & Clean (if needed) and finish with Renew & Repair Cuticle Oil.
Our original, crystal-clear UV Sealer is a thin-viscosity top coat that finishes your service with a high-gloss shine.
Features & Benefits:
- Acrylic-like strength with greater flexibility
- Allows for growth and flexing of natural nails underneath
- Reduces lifting caused by non-flexible products
- It can be applied to all five nails at once without worrying about the product running into cuticles or side walls
How To Use:
The sealer is a UV-only gel top coat. Apply a thin layer all over your finished nail and cure for 120 seconds in a UV or UV/LED lamp. Cleanse with Prep & Clean and finish with Renew & Repair Cuticle Oil.
FAQS:
My lamp is UV/LED - will that work? Yes, as long as the lamp has UV capability, it will cure the sealer, which is no problem.
How is Sealer different from your other hard gel top coats? Sealer is our only gel top coat in a pot, giving some nail techs more product control. While it is a traditional, tacky top coat like Super Shine, it is a thinner formula. It is also our most durable top coat. Can I use Sealer on top of lac it!? We recommend sticking with I'm A No-Wipe, Shine, or Super Shine for non-porous options. Why is sealer curing patchy? This is likely because oil was left on the surface before application, or Prep & Clean was not fully dry.
General Resin System Use:
- Begin with a properly prepped and cleansed nail. [If using tips or forms, apply them now.]
- [Optional Step] For extra adhesion, apply a thin layer of Super Bond to the nail and let air dry for 30 seconds.
- Apply a thin Connector or CBS Connect layer and cure for 60 seconds LED/2 minutes UV.
- With your favourite gel brush, place a bead of Premium Modeling Resin or Extender Resin in the centre of the nail and gently guide it into the desired length and shape. Remember, use the product to move the product. With Premium Modeling Resin, you can repeat the process across all five fingers before curing. Cure for 60 seconds LED/2 minutes UV. Apply a second layer as needed.
- Wipe the dispersion layer with Prep & Clean and a No-Lint Wipe, then file/buff it into shape as needed.
- Apply two coats of your favourite colour, or for a natural finish, go ahead and apply your favourite top coat. Cure fully.
- Cleanse with Prep & Clean (if needed) and finish with Renew & Repair Cuticle Oil.
Our original, crystal-clear UV Sealer is a thin-viscosity top coat that finishes your service with a high-gloss shine.
Features & Benefits:
- Acrylic-like strength with greater flexibility
- Allows for growth and flexing of natural nails underneath
- Reduces lifting caused by non-flexible products
- It can be applied to all five nails at once without worrying about the product running into cuticles or side walls
How To Use:
The sealer is a UV-only gel top coat. Apply a thin layer all over your finished nail and cure for 120 seconds in a UV or UV/LED lamp. Cleanse with Prep & Clean and finish with Renew & Repair Cuticle Oil.
FAQS:
My lamp is UV/LED - will that work? Yes, as long as the lamp has UV capability, it will cure the sealer, which is no problem.
How is Sealer different from your other hard gel top coats? Sealer is our only gel top coat in a pot, giving some nail techs more product control. While it is a traditional, tacky top coat like Super Shine, it is a thinner formula. It is also our most durable top coat. Can I use Sealer on top of lac it!? We recommend sticking with I'm A No-Wipe, Shine, or Super Shine for non-porous options. Why is sealer curing patchy? This is likely because oil was left on the surface before application, or Prep & Clean was not fully dry.
General Resin System Use:
- Begin with a properly prepped and cleansed nail. [If using tips or forms, apply them now.]
- [Optional Step] For extra adhesion, apply a thin layer of Super Bond to the nail and let air dry for 30 seconds.
- Apply a thin Connector or CBS Connect layer and cure for 60 seconds LED/2 minutes UV.
- With your favourite gel brush, place a bead of Premium Modeling Resin or Extender Resin in the centre of the nail and gently guide it into the desired length and shape. Remember, use the product to move the product. With Premium Modeling Resin, you can repeat the process across all five fingers before curing. Cure for 60 seconds LED/2 minutes UV. Apply a second layer as needed.
- Wipe the dispersion layer with Prep & Clean and a No-Lint Wipe, then file/buff it into shape as needed.
- Apply two coats of your favourite colour, or for a natural finish, go ahead and apply your favourite top coat. Cure fully.
- Cleanse with Prep & Clean (if needed) and finish with Renew & Repair Cuticle Oil.
Our original, crystal-clear UV Sealer is a thin-viscosity top coat that finishes your service with a high-gloss shine.
Features & Benefits:
- Acrylic-like strength with greater flexibility
- Allows for growth and flexing of natural nails underneath
- Reduces lifting caused by non-flexible products
- It can be applied to all five nails at once without worrying about the product running into cuticles or side walls
How To Use:
The sealer is a UV-only gel top coat. Apply a thin layer all over your finished nail and cure for 120 seconds in a UV or UV/LED lamp. Cleanse with Prep & Clean and finish with Renew & Repair Cuticle Oil.
FAQS:
My lamp is UV/LED - will that work? Yes, as long as the lamp has UV capability, it will cure the sealer, which is no problem.
How is Sealer different from your other hard gel top coats? Sealer is our only gel top coat in a pot, giving some nail techs more product control. While it is a traditional, tacky top coat like Super Shine, it is a thinner formula. It is also our most durable top coat. Can I use Sealer on top of lac it!? We recommend sticking with I'm A No-Wipe, Shine, or Super Shine for non-porous options. Why is sealer curing patchy? This is likely because oil was left on the surface before application, or Prep & Clean was not fully dry.
General Resin System Use:
- Begin with a properly prepped and cleansed nail. [If using tips or forms, apply them now.]
- [Optional Step] For extra adhesion, apply a thin layer of Super Bond to the nail and let air dry for 30 seconds.
- Apply a thin Connector or CBS Connect layer and cure for 60 seconds LED/2 minutes UV.
- With your favourite gel brush, place a bead of Premium Modeling Resin or Extender Resin in the centre of the nail and gently guide it into the desired length and shape. Remember, use the product to move the product. With Premium Modeling Resin, you can repeat the process across all five fingers before curing. Cure for 60 seconds LED/2 minutes UV. Apply a second layer as needed.
- Wipe the dispersion layer with Prep & Clean and a No-Lint Wipe, then file/buff it into shape as needed.
- Apply two coats of your favourite colour, or for a natural finish, go ahead and apply your favourite top coat. Cure fully.
- Cleanse with Prep & Clean (if needed) and finish with Renew & Repair Cuticle Oil.