RefectoCil Lash & Brow Tint Pure Black 15ml RC5710
Especially recommended for tinting the eyelashes and eyebrows of clients who have black or dark brown hair – for the most beautiful black styles!
- Pure black lashes and brows
- Mixable with all 8 RefectoCil tints
- Smudge- and waterproof
- Lasts 6 weeks
STEP 1: Preparation
- Remove contact lenses.
- Clean the eye area with our oil-free, lash-strengthening RefectoCil Micellar Eye Make-up Remover.
- Use RefectoCil Saline Solution to remove residues and achieve optimum results.
- Use RefectoCil Silicone Pads or Skin Protection Cream and Eye Protection papers according to instructions.
STEP 2: Mix & Apply
- Immediately before tinting mix 2cm of tint and 10 drops RefectoCil Oxidant liquid or 15-20 drops of RefectoCil Oxidant cream into a creamy paste.
- Afterwards, apply to brows and lashes.
STEP 3: Application time
- Lashes: 10 minutes.
- Brows: 10 minutes.
STEP 4: Ready!
- Remove by using cotton wool pads and water.
Tips & Tricks
- If RefectoCil Blonde Brow has been previously used, the application time is shortened by 1-5 minutes, with RefectoCil Eyelash Curl it’s shortened to 2 minutes.
- Allergy test: We recommend an allergy test (patch test) before the first application as well as after long periods without tinting
Skin Sensitivity Test:
There is a small number of individuals who show an allergic reaction to hair colours. In very rare cases this reaction may be severe. To reduce the risk of an allergic reaction it is important to carry out a skin sensitivity test. This skin sensitivity test must be carried out 48-72 hours before each application to ascertain if there is an allergy or sensitivity against the product or if such has emerged since the last application. Instructions: Mix 1 cm of RefectoCil® Eyelash & Eyebrow Tint with 5 drops of Oxidant liquid (or Mix 1:1 with RefectoCil® Oxidant cream). Apply a small amount to a small area on the inner bend of the elbow or behind the ear. Allow to dry and leave uncovered for 48-72 hours, then clean thoroughly. If any irritation occurs during this time do not carry out the treatment.
Before and After:
Ingredients:
Aqua, Cetearyl Alcohol, Toluene-2,5-Diamine, m-Aminophenol, Bis-Diglyceryl Polyacyladipate-2, PEG-40 Hydrogenated Castor Oil, Sodium Cetearyl Sulfate, 2,4-Diaminophenoxyethanol, Sodium Laureth Sulfate, CI 77499, CI 77491.
See Video:
Especially recommended for tinting the eyelashes and eyebrows of clients who have black or dark brown hair – for the most beautiful black styles!
- Pure black lashes and brows
- Mixable with all 8 RefectoCil tints
- Smudge- and waterproof
- Lasts 6 weeks
STEP 1: Preparation
- Remove contact lenses.
- Clean the eye area with our oil-free, lash-strengthening RefectoCil Micellar Eye Make-up Remover.
- Use RefectoCil Saline Solution to remove residues and achieve optimum results.
- Use RefectoCil Silicone Pads or Skin Protection Cream and Eye Protection papers according to instructions.
STEP 2: Mix & Apply
- Immediately before tinting mix 2cm of tint and 10 drops RefectoCil Oxidant liquid or 15-20 drops of RefectoCil Oxidant cream into a creamy paste.
- Afterwards, apply to brows and lashes.
STEP 3: Application time
- Lashes: 10 minutes.
- Brows: 10 minutes.
STEP 4: Ready!
- Remove by using cotton wool pads and water.
Tips & Tricks
- If RefectoCil Blonde Brow has been previously used, the application time is shortened by 1-5 minutes, with RefectoCil Eyelash Curl it’s shortened to 2 minutes.
- Allergy test: We recommend an allergy test (patch test) before the first application as well as after long periods without tinting
Skin Sensitivity Test:
There is a small number of individuals who show an allergic reaction to hair colours. In very rare cases this reaction may be severe. To reduce the risk of an allergic reaction it is important to carry out a skin sensitivity test. This skin sensitivity test must be carried out 48-72 hours before each application to ascertain if there is an allergy or sensitivity against the product or if such has emerged since the last application. Instructions: Mix 1 cm of RefectoCil® Eyelash & Eyebrow Tint with 5 drops of Oxidant liquid (or Mix 1:1 with RefectoCil® Oxidant cream). Apply a small amount to a small area on the inner bend of the elbow or behind the ear. Allow to dry and leave uncovered for 48-72 hours, then clean thoroughly. If any irritation occurs during this time do not carry out the treatment.
Before and After:
Ingredients:
Aqua, Cetearyl Alcohol, Toluene-2,5-Diamine, m-Aminophenol, Bis-Diglyceryl Polyacyladipate-2, PEG-40 Hydrogenated Castor Oil, Sodium Cetearyl Sulfate, 2,4-Diaminophenoxyethanol, Sodium Laureth Sulfate, CI 77499, CI 77491.
See Video:
Especially recommended for tinting the eyelashes and eyebrows of clients who have black or dark brown hair – for the most beautiful black styles!
- Pure black lashes and brows
- Mixable with all 8 RefectoCil tints
- Smudge- and waterproof
- Lasts 6 weeks
STEP 1: Preparation
- Remove contact lenses.
- Clean the eye area with our oil-free, lash-strengthening RefectoCil Micellar Eye Make-up Remover.
- Use RefectoCil Saline Solution to remove residues and achieve optimum results.
- Use RefectoCil Silicone Pads or Skin Protection Cream and Eye Protection papers according to instructions.
STEP 2: Mix & Apply
- Immediately before tinting mix 2cm of tint and 10 drops RefectoCil Oxidant liquid or 15-20 drops of RefectoCil Oxidant cream into a creamy paste.
- Afterwards, apply to brows and lashes.
STEP 3: Application time
- Lashes: 10 minutes.
- Brows: 10 minutes.
STEP 4: Ready!
- Remove by using cotton wool pads and water.
Tips & Tricks
- If RefectoCil Blonde Brow has been previously used, the application time is shortened by 1-5 minutes, with RefectoCil Eyelash Curl it’s shortened to 2 minutes.
- Allergy test: We recommend an allergy test (patch test) before the first application as well as after long periods without tinting
Skin Sensitivity Test:
There is a small number of individuals who show an allergic reaction to hair colours. In very rare cases this reaction may be severe. To reduce the risk of an allergic reaction it is important to carry out a skin sensitivity test. This skin sensitivity test must be carried out 48-72 hours before each application to ascertain if there is an allergy or sensitivity against the product or if such has emerged since the last application. Instructions: Mix 1 cm of RefectoCil® Eyelash & Eyebrow Tint with 5 drops of Oxidant liquid (or Mix 1:1 with RefectoCil® Oxidant cream). Apply a small amount to a small area on the inner bend of the elbow or behind the ear. Allow to dry and leave uncovered for 48-72 hours, then clean thoroughly. If any irritation occurs during this time do not carry out the treatment.
Before and After:
Ingredients:
Aqua, Cetearyl Alcohol, Toluene-2,5-Diamine, m-Aminophenol, Bis-Diglyceryl Polyacyladipate-2, PEG-40 Hydrogenated Castor Oil, Sodium Cetearyl Sulfate, 2,4-Diaminophenoxyethanol, Sodium Laureth Sulfate, CI 77499, CI 77491.
See Video:
Especially recommended for tinting the eyelashes and eyebrows of clients who have black or dark brown hair – for the most beautiful black styles!
- Pure black lashes and brows
- Mixable with all 8 RefectoCil tints
- Smudge- and waterproof
- Lasts 6 weeks
STEP 1: Preparation
- Remove contact lenses.
- Clean the eye area with our oil-free, lash-strengthening RefectoCil Micellar Eye Make-up Remover.
- Use RefectoCil Saline Solution to remove residues and achieve optimum results.
- Use RefectoCil Silicone Pads or Skin Protection Cream and Eye Protection papers according to instructions.
STEP 2: Mix & Apply
- Immediately before tinting mix 2cm of tint and 10 drops RefectoCil Oxidant liquid or 15-20 drops of RefectoCil Oxidant cream into a creamy paste.
- Afterwards, apply to brows and lashes.
STEP 3: Application time
- Lashes: 10 minutes.
- Brows: 10 minutes.
STEP 4: Ready!
- Remove by using cotton wool pads and water.
Tips & Tricks
- If RefectoCil Blonde Brow has been previously used, the application time is shortened by 1-5 minutes, with RefectoCil Eyelash Curl it’s shortened to 2 minutes.
- Allergy test: We recommend an allergy test (patch test) before the first application as well as after long periods without tinting
Skin Sensitivity Test:
There is a small number of individuals who show an allergic reaction to hair colours. In very rare cases this reaction may be severe. To reduce the risk of an allergic reaction it is important to carry out a skin sensitivity test. This skin sensitivity test must be carried out 48-72 hours before each application to ascertain if there is an allergy or sensitivity against the product or if such has emerged since the last application. Instructions: Mix 1 cm of RefectoCil® Eyelash & Eyebrow Tint with 5 drops of Oxidant liquid (or Mix 1:1 with RefectoCil® Oxidant cream). Apply a small amount to a small area on the inner bend of the elbow or behind the ear. Allow to dry and leave uncovered for 48-72 hours, then clean thoroughly. If any irritation occurs during this time do not carry out the treatment.
Before and After:
Ingredients:
Aqua, Cetearyl Alcohol, Toluene-2,5-Diamine, m-Aminophenol, Bis-Diglyceryl Polyacyladipate-2, PEG-40 Hydrogenated Castor Oil, Sodium Cetearyl Sulfate, 2,4-Diaminophenoxyethanol, Sodium Laureth Sulfate, CI 77499, CI 77491.