NSI Glaze n Go LED-UV Gel Top Coat 15ml 5307-12
Glaze n Go LED gel top coat is a Tack-Free, UV-curable top coat that finishes and protects your clients’ nail enhancements. It brushes on smooth, like polish, for a radiant, tack-free finish.
Glaze n Go LED gel top coat is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
Use Glaze N Go LED as a top coat for your clients’ acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
- Brushes on smooth, like polish, for a radiant, tack-free finish
- Glaze n Go LED’s flexible finish is formulated to last longer between services.
- Save time with new LED technology! 30 seconds in an LED lamp or 120 seconds in a UV nail lamp
- Glaze n Go LED is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
- No buffing is required. There is no tacky layer—long-lasting high-gloss shine.
- You can use it as a top coat for acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
Instructions:
After the enhancement of the product application, file and shape it with an Endurance 180/180 Grit File. No buffing is required. Do not buff. Wipe with Cleanse, then apply Glaze ’n Go LED. Cure in a full-hand UV lamp for 120 seconds. There is no tacky layer—long-lasting high-gloss shine.
FAQ:
Q: Approximately how much should I charge for a Glaze ‘n Go LED service?
A: It will vary from region to region. Check other salons to see if they charge for a protective gel sealer. A good rule of thumb is $3.00 – $5.00 per service. Be sure to point out the benefits to the client. It will create super shiny and smooth nails that stay that way no matter how active they are.
Q: Can I use Glaze ‘n Go LED over a natural nail manicure?
A: Glaze ‘n Go LED is designed to cure over acrylic, gel, or wrap enhancements. It does not seal or dry nail enamel.
Q: Does Glaze ‘n Go LED have a tacky dispersion layer to remove?
A: No. Glaze ‘n Go is completely tack-free and cures a smooth, high-gloss shine.
Q: My Glaze n Go LED isn’t staying Shiny! What happened?
A: Here are a couple of things you can do to ensure the shine lasts as long as possible!
- When the hand is removed from the lamp, do not apply Nurture Oil immediately and do not touch the finished nail. After pulling the hand from the lamp takes about 15-30 seconds to cool down, keeping it from becoming dull. The rapid heat spike from LED bulbs also needs a few seconds to cool.
- While it should work with ANY LED lamp, we only test our products with it, so we cannot guarantee it will work with all other lamps. It should cure fine in 60 seconds in any high-quality lamp.
Glaze n Go LED gel top coat is a Tack-Free, UV-curable top coat that finishes and protects your clients’ nail enhancements. It brushes on smooth, like polish, for a radiant, tack-free finish.
Glaze n Go LED gel top coat is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
Use Glaze N Go LED as a top coat for your clients’ acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
- Brushes on smooth, like polish, for a radiant, tack-free finish
- Glaze n Go LED’s flexible finish is formulated to last longer between services.
- Save time with new LED technology! 30 seconds in an LED lamp or 120 seconds in a UV nail lamp
- Glaze n Go LED is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
- No buffing is required. There is no tacky layer—long-lasting high-gloss shine.
- You can use it as a top coat for acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
Instructions:
After the enhancement of the product application, file and shape it with an Endurance 180/180 Grit File. No buffing is required. Do not buff. Wipe with Cleanse, then apply Glaze ’n Go LED. Cure in a full-hand UV lamp for 120 seconds. There is no tacky layer—long-lasting high-gloss shine.
FAQ:
Q: Approximately how much should I charge for a Glaze ‘n Go LED service?
A: It will vary from region to region. Check other salons to see if they charge for a protective gel sealer. A good rule of thumb is $3.00 – $5.00 per service. Be sure to point out the benefits to the client. It will create super shiny and smooth nails that stay that way no matter how active they are.
Q: Can I use Glaze ‘n Go LED over a natural nail manicure?
A: Glaze ‘n Go LED is designed to cure over acrylic, gel, or wrap enhancements. It does not seal or dry nail enamel.
Q: Does Glaze ‘n Go LED have a tacky dispersion layer to remove?
A: No. Glaze ‘n Go is completely tack-free and cures a smooth, high-gloss shine.
Q: My Glaze n Go LED isn’t staying Shiny! What happened?
A: Here are a couple of things you can do to ensure the shine lasts as long as possible!
- When the hand is removed from the lamp, do not apply Nurture Oil immediately and do not touch the finished nail. After pulling the hand from the lamp takes about 15-30 seconds to cool down, keeping it from becoming dull. The rapid heat spike from LED bulbs also needs a few seconds to cool.
- While it should work with ANY LED lamp, we only test our products with it, so we cannot guarantee it will work with all other lamps. It should cure fine in 60 seconds in any high-quality lamp.
Glaze n Go LED gel top coat is a Tack-Free, UV-curable top coat that finishes and protects your clients’ nail enhancements. It brushes on smooth, like polish, for a radiant, tack-free finish.
Glaze n Go LED gel top coat is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
Use Glaze N Go LED as a top coat for your clients’ acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
- Brushes on smooth, like polish, for a radiant, tack-free finish
- Glaze n Go LED’s flexible finish is formulated to last longer between services.
- Save time with new LED technology! 30 seconds in an LED lamp or 120 seconds in a UV nail lamp
- Glaze n Go LED is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
- No buffing is required. There is no tacky layer—long-lasting high-gloss shine.
- You can use it as a top coat for acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
Instructions:
After the enhancement of the product application, file and shape it with an Endurance 180/180 Grit File. No buffing is required. Do not buff. Wipe with Cleanse, then apply Glaze ’n Go LED. Cure in a full-hand UV lamp for 120 seconds. There is no tacky layer—long-lasting high-gloss shine.
FAQ:
Q: Approximately how much should I charge for a Glaze ‘n Go LED service?
A: It will vary from region to region. Check other salons to see if they charge for a protective gel sealer. A good rule of thumb is $3.00 – $5.00 per service. Be sure to point out the benefits to the client. It will create super shiny and smooth nails that stay that way no matter how active they are.
Q: Can I use Glaze ‘n Go LED over a natural nail manicure?
A: Glaze ‘n Go LED is designed to cure over acrylic, gel, or wrap enhancements. It does not seal or dry nail enamel.
Q: Does Glaze ‘n Go LED have a tacky dispersion layer to remove?
A: No. Glaze ‘n Go is completely tack-free and cures a smooth, high-gloss shine.
Q: My Glaze n Go LED isn’t staying Shiny! What happened?
A: Here are a couple of things you can do to ensure the shine lasts as long as possible!
- When the hand is removed from the lamp, do not apply Nurture Oil immediately and do not touch the finished nail. After pulling the hand from the lamp takes about 15-30 seconds to cool down, keeping it from becoming dull. The rapid heat spike from LED bulbs also needs a few seconds to cool.
- While it should work with ANY LED lamp, we only test our products with it, so we cannot guarantee it will work with all other lamps. It should cure fine in 60 seconds in any high-quality lamp.
Glaze n Go LED gel top coat is a Tack-Free, UV-curable top coat that finishes and protects your clients’ nail enhancements. It brushes on smooth, like polish, for a radiant, tack-free finish.
Glaze n Go LED gel top coat is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
Use Glaze N Go LED as a top coat for your clients’ acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
- Brushes on smooth, like polish, for a radiant, tack-free finish
- Glaze n Go LED’s flexible finish is formulated to last longer between services.
- Save time with new LED technology! 30 seconds in an LED lamp or 120 seconds in a UV nail lamp
- Glaze n Go LED is a Tack-Free Enhancement sealant for use over Gel or Acrylic Enhancements to save time on buffing and filing.
- No buffing is required. There is no tacky layer—long-lasting high-gloss shine.
- You can use it as a top coat for acrylic and gel enhancements or as a sealant to keep your nail art designs looking beautiful.
Instructions:
After the enhancement of the product application, file and shape it with an Endurance 180/180 Grit File. No buffing is required. Do not buff. Wipe with Cleanse, then apply Glaze ’n Go LED. Cure in a full-hand UV lamp for 120 seconds. There is no tacky layer—long-lasting high-gloss shine.
FAQ:
Q: Approximately how much should I charge for a Glaze ‘n Go LED service?
A: It will vary from region to region. Check other salons to see if they charge for a protective gel sealer. A good rule of thumb is $3.00 – $5.00 per service. Be sure to point out the benefits to the client. It will create super shiny and smooth nails that stay that way no matter how active they are.
Q: Can I use Glaze ‘n Go LED over a natural nail manicure?
A: Glaze ‘n Go LED is designed to cure over acrylic, gel, or wrap enhancements. It does not seal or dry nail enamel.
Q: Does Glaze ‘n Go LED have a tacky dispersion layer to remove?
A: No. Glaze ‘n Go is completely tack-free and cures a smooth, high-gloss shine.
Q: My Glaze n Go LED isn’t staying Shiny! What happened?
A: Here are a couple of things you can do to ensure the shine lasts as long as possible!
- When the hand is removed from the lamp, do not apply Nurture Oil immediately and do not touch the finished nail. After pulling the hand from the lamp takes about 15-30 seconds to cool down, keeping it from becoming dull. The rapid heat spike from LED bulbs also needs a few seconds to cool.
- While it should work with ANY LED lamp, we only test our products with it, so we cannot guarantee it will work with all other lamps. It should cure fine in 60 seconds in any high-quality lamp.